Crane Lifting Machine Wire Rope Electric Hoist 5T For Crane
Product Description
Crane Lifting Machine Wire rope Electric Hoist 5T For Crane
Introduction:
CD1 type wirerope electric Hoist as lifting machnine is a kind of light-duty lifting equipment with advantages of tight structure, light weight, small volume, wide common use and convenient operation etc.If reducers with hard gear surface are applied, it will have long life and high mechanical efficiency. Conic rotor brake motors are equipped which has safety Limiter in both up and down directions.
CD1 type wirerope electric hoist as lifting machnine can be widely used to electric hoist heavy objects, or installed on the straight or curve I-section steel beam of single beam cranes. They can also be used together with Electric Hoist Double beam gantry cranes and jib cranes. All the above has made the electric hoist common in industrial and ore enterprises, railway, wharfs and warehoues.
Features:
Motor : electric hoist as lifting machnine Motor is a squirrel cage taper type rotor motor with braking, it is made by Nanjing special motor factory, it is the best quality motor, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Wire Rope: electric hoist ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope, is six.
Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.
Gear Box: electric hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Electric apparatus controlling system: Model CD1 and MD1 electric hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).
Hook : The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.
Technical Parameter:
1 | Model | CD and MD |
2 | Rated load capacity (T) | 0.5, 1, 2,3, 5, 10,16, 20 ton |
3 | Rated span (m) | 7.5-31.5 |
4 | lifting height (m) | 6, 9, 12, 18, 24, 30 |
5 | Work dury | A3 andA4 |
6 | Control way | Pendent line control or Remote control or both |
7 | Motor | Squirrelcage rotor motor Nanjing Special brand(No.1 in China) |
8 | Power supply | 380V 50hz 3phs (or according to your demand) |
9 | Main hook lifting speed (m/min) | 8/0.8m/min, 7/0.7m/min, 3.5/0.35m/min |
10 | Trolley travelling speed (m/min) | 20/30m/min |
11 | I beam model | 16-63c |
12 | Min. rotate radius | 0.8m-9m |
The techinacl parameter is for your reference ,if you want to order the hoist , pls tell the following data:
1. the capacity
2. the lifting height
4. the industrial voltage in your country
5. the other special demand
Also welcome your visiting to our factory!
electric hoist picture:
electric hoist Packed In High Quality Wooden Case:
GOST CERTIFICATE:
Foreign Buyer for electric hoist:
Spare parts for electric hoist:
YunTian Group products meet the factory, workshop, port, mining, waste disposal, goods scattered, petrochemical, aerospace, military and other industries of universal Bridge Crane, Overhead Crane, eot crane, door crane, universal Gantry crane, rubber tyre and Rail mounted container Gantry Crane four link type Portal Crane, quayside Container crane, crane, crane hook, mining Grab Crane , gantry crane, ship loader, grab bucket ship unloader, stacker reclaimer, dredger, mobile platforms and other types of hydraulic crane technical requirements.
YunTian Group has a team of enthusiastic young people who treat every customer as their friend. Employees mutual help to service the customers from every detail. So you can get not only high quality products but personalized service.
“YunTian is a supplier worthy of cooperation!”
Oh, do we crack ourselves up?
NO! It's the customers' comments.
Thank you for your interests in Yuntian Group. Please feel free to submit your inquiry information to us. We love to talk and are not afraid to discuss any question about your crane, Hydraulic platform, hoist, winch need. Our sales manager will contact with you as soon as possible.
Just send your inquiry in the textbox below!
Product Categories : Hoist Series