CE Electric Single Beam Bridge Monorail Hoist Crane

Type: LDA model single beam bridge monorail hoist crane
Lifting capacity: 1-20ton
Span: 7.5-31.5m. Non-standard design can also be caught out according your requirement.
Structure:
1. The bridge: traverses on the Rail ;
2. The hoist : traverses on the bridge and lifts up and down;
3. The rail: tied to the building structure.

1. Main beam: One-time- forming on the main 

girder. This result in lower dead weight with a high degree of vertical and horizontal rigidity and smaller Wheel load being transmitted to the crane runway. Which also can reduce distortion in conveying; make sure the accuracy; improve the machine's strength and working efficiency. One-body shaped, No welding for main beam box!
2. End carriage:  Crane travelling system, Motor - Reducer -Wheel driven system! motor used soft start motor which result in very stable starting!
3. Lifting mechanism: Monorail Electric Hoist. There are two kinds could be optional, CD model with single lifting speed, MD model with double lifting speed! 
4. Electrical equipment: Electric systems are Siemens brand or Schneider brand!
5. Motor: motor brand for hoist and traveling are Nanjing special brand, the top brand in China!
6. Gear box: Tailong or Taixing brand, Top brand on heavy duty gearbox!
7. Long service life with a low-maintenance.

1. Overload protection: If the materials or electric

2. current overstep the capacity, the crane will give a

    sharp warning for protection itself.
3. Emergency brake: If there’s emergency situation, it 

    could stop the crane to protect operator and goods.
4. Rubber buffers.

One-time- forming on the main girder. Which can reduce distortion in conveying; make sure the accuracy; improve the machine’s strength and working efficiency.

Ground handle; Remote control; cabin (open and closed)